Switches, Hubs, and Modems
cancel
Showing results for 
Search instead for 
Did you mean: 

Siwtch Fault

skhargotre
Occasional Advisor

Siwtch Fault

Hi we have installed HP Switch 2610, It was working properly, but now fault light is Blinking and Uplik port number 25 is also Blinking but cable is not conected to the port uplink.
Attaching Log file.

Can any help me on this.
2 REPLIES
Pieter 't Hart
Honored Contributor

Re: Siwtch Fault

>>>Event Log listing: Events Since Boot <<<

=> no info in log from before the boot
>>>
I 01/01/90 00:14:29 system: System went down: 01/01/90 00:14:08
I 01/01/90 00:14:29 system: Operator warm reload from TELNET session.
<<<

=> looks like operator issued reload command from telnet session
This could be the reason for the restart?

ports 18, 24 and 25 seems to be connected to other switches
Through these switches there is a loop in the network. wich results in some ports being blocked by STP
cenk sasmaztin
Honored Contributor

Re: Siwtch Fault

hi please send me sh tech print
cenk