Switches, Hubs, and Modems
1748254 Members
3999 Online
108760 Solutions
New Discussion юеВ

Re: Stacking Kit For J4093A

 
SOLVED
Go to solution
Gurd Mar
Occasional Contributor

Stacking Kit For J4093A

I have seven J4093A ( HP ProCurve Switch 2424M ) which I wish to "stack". I have purchased ( 3 x ) the HP ProCurve Switch - Gigabit Stacking Kit - which comprises of two transceivers and a cable - is this the correct part. If so, I seem to be missing the frame / module on which these transceivers should be mounted and then inserted into the 2424M module slot. Can someone please advise what I need to get this working?
2 REPLIES 2
MIBA NSD
Advisor

Re: Stacking Kit For J4093A

have u purchased a
J4130A HP ProCurve Switch 2424m Gigabit Stacking Module or an
J4116A HP ProCurve Switch Gigabit Stacking Kit for 2524?
SCOOTER
Esteemed Contributor
Solution

Re: Stacking Kit For J4093A

Hi Gurd,

The Gigabit Stacking Kit is the correct part but you are indeed missing the module.

If you want to stack all 7 switches you would need:

7* J4130A Stacking Module (Obsolete)
6* J4116A Stackingkit

I hope you can find the StackingModules, they are obsolete.

Best Regards,

SCOOTER