HPE Community
Switches, Hubs, and Modems
1752761 Members
4833 Online
108789 Solutions
New Discussion юеВ

Stop 5308 sending traps when edge-port goes up/down?

 
SOLVED
Go to solution
seymour999
Frequent Advisor

тАО03-04-2010 12:25 PM

тАО03-04-2010 12:25 PM

Stop 5308 sending traps when edge-port goes up/down?

Have a couple of 5308s (E.11.03) that report when an edge-port changes state by sending LinkUp and LinkDown traps.

The ports being reported are configured the same as any other edge-ports.

Is there an equivalent command to "no logging-event link-status" that would stop the switch reporting these?

TIA,
Evan
0 Kudos
3 REPLIES 3
Mohammed Faiz
Honored Contributor

тАО03-05-2010 02:04 AM

тАО03-05-2010 02:04 AM

Solution

Re: Stop 5308 sending traps when edge-port goes up/down?

Hi,

How about:

no snmp-server enable traps link-change
seymour999
Frequent Advisor

тАО03-05-2010 05:57 AM

тАО03-05-2010 05:57 AM

Re: Stop 5308 sending traps when edge-port goes up/down?

That fixed it.

Thanks, Mohammed.

Evan
0 Kudos
seymour999
Frequent Advisor

тАО03-09-2010 06:35 AM

тАО03-09-2010 06:35 AM

Re: Stop 5308 sending traps when edge-port goes up/down?

Mohammed's solution fixed it.
0 Kudos
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.