Switch Configuration -> IPManagers -> Procurve 2524

[James Cornick]

Okay so basically I'm trying to get my switch to allow all IP access to a read snmp community. If possible what is the best method for acheiving this. I haven't been able to come across a method that works so far. Or is there a way to just completely disable the IP security?

===========================- TELNET - MANAGER MODE -============================
Switch Configuration - IP Managers

Authorized Manager IP IP Mask Access Level
---------------------- ---------------------- ----------------------



Actions-> Back Add Edit Delete Help

[cenk sasmaztin]

(config)# ip authorized-managers xxx.xxx.xxx.xxx

with this command only one ip address manager this switch

unable other ip address connection on switch and do not take snmp data on switch

[James Cornick]

This is the command to allow one IP right? What I am attempting to do is just allow ALL IPs. As I want to be able to query SNMP from anywhere I am at. Which is what my original question was. Thanks for the input however I just didn't make myself very clear on the original question.

[cenk sasmaztin]

procurve switch all ip address sharing snmp information with factory default setings