Switches, Hubs, and Modems
cancel
Showing results for 
Search instead for 
Did you mean: 

Switch Configuration -> IPManagers -> Procurve 2524

James Cornick
Occasional Visitor

Switch Configuration -> IPManagers -> Procurve 2524

Okay so basically I'm trying to get my switch to allow all IP access to a read snmp community. If possible what is the best method for acheiving this. I haven't been able to come across a method that works so far. Or is there a way to just completely disable the IP security?

===========================- TELNET - MANAGER MODE -============================
Switch Configuration - IP Managers

Authorized Manager IP IP Mask Access Level
---------------------- ---------------------- ----------------------



Actions-> Back Add Edit Delete Help
3 REPLIES
cenk sasmaztin
Honored Contributor

Re: Switch Configuration -> IPManagers -> Procurve 2524

(config)# ip authorized-managers xxx.xxx.xxx.xxx

with this command only one ip address manager this switch

unable other ip address connection on switch and do not take snmp data on switch
cenk

James Cornick
Occasional Visitor

Re: Switch Configuration -> IPManagers -> Procurve 2524

This is the command to allow one IP right? What I am attempting to do is just allow ALL IPs. As I want to be able to query SNMP from anywhere I am at. Which is what my original question was. Thanks for the input however I just didn't make myself very clear on the original question.
cenk sasmaztin
Honored Contributor

Re: Switch Configuration -> IPManagers -> Procurve 2524

procurve switch all ip address sharing snmp information with factory default setings
cenk