Switches, Hubs, and Modems
cancel
Showing results for 
Search instead for 
Did you mean: 

Switch mibs

eanderso73
Occasional Visitor

Switch mibs

I am trying to monitor a few HP P series GBe2 network switches and Brocade fiber switches. The SNMP settings are correct but I receive errors that aren't supported in SIM 5.1 SP1 as follows:

From a Brocade 4Gb SAN Switch for HP p-Class BladeSystem

Mib data does not match the trap, make sure the latest version of the MIB is registered. The SNMP OID is 1.3.6.1.3.94.1.10.1.17.16.0.0.5.30.2.159.239.0.0.0.0.0.0.0.0.1

Are there addidtional mibs that I can install to handle these errors?

Erik
1 REPLY
DaGuru
Trusted Contributor

Re: Switch mibs

Hi Erik,

I'm not familiar with the SAN management interface, but what you have here appears to be the connUnitPortName (OID:1.3.6.1.3.94.1.10.1.17) and is defined in fa-mib40.mib, found in the HP SIM MIB directory. You can verify MIB registration in HP SIM by running mxmib -l or by looking at the list of MIBs in global alert settings.

[16.0.0.5.30.2.159.239.0.0.0.0.0.0.0.0.1] is the string value, which describes the port. Sorry, I have not seen anything that will translate the string data into anything useful.

Which trap is reporting this?
---------------------------------------------
I work for HP, but my posts and replies are my own.