Syslog Messages Question

[Scooterbum]

I have a number of 2626 pwr and 5400z switches.
Keep getting strange error message-
W 01/16/08 15:33:45 00134 tftp: SENT error:1, msg: File not found
W 01/16/08 15:35:00 00134 tftp: SENT error:1, msg: File not found
W 01/16/08 15:35:27 00134 tftp: SENT error:1, msg: File not found
W 01/16/08 15:35:38 00134 tftp: SENT error:1, msg: File not found
W 01/16/08 15:35:58 00134 tftp: SENT error:1, msg: File not found

IWhat are these and how do I stop them ?
thanks

[Mohieddin Kharnoub]

Hi

Would you attach the config of one of these switches like the 5400 after removing any sensitive information.

Good Luck !!!

[Scooterbum]

Attached is config file
thanks for looking

[Evert Goor]

Look for a cisco router/switch in your network. Mostly those are the ones who are doing a tftp config file broadcast.

[Evert Goor]

forgot the fix. if it is a cisco.

Enter the "no service config" command to disable the autoloading of configuration files

Then write to memory and copy running-config to startup-config and you should be good to go.

[Mohieddin Kharnoub]

Hi

I don't see any logging host configured on the attached configuration,
so i don't think its the Procurve switch is sending these syslog messages.

Whats your Syslog software you are using?

Also previous post by Evert makes sense to me.

Good Luck !!!