Switches, Hubs, and Modems
cancel
Showing results for 
Search instead for 
Did you mean: 

Syslog Messages Question

Scooterbum
Occasional Contributor

Syslog Messages Question

I have a number of 2626 pwr and 5400z switches.
Keep getting strange error message-
W 01/16/08 15:33:45 00134 tftp: SENT error:1, msg: File not found
W 01/16/08 15:35:00 00134 tftp: SENT error:1, msg: File not found
W 01/16/08 15:35:27 00134 tftp: SENT error:1, msg: File not found
W 01/16/08 15:35:38 00134 tftp: SENT error:1, msg: File not found
W 01/16/08 15:35:58 00134 tftp: SENT error:1, msg: File not found

IWhat are these and how do I stop them ?
thanks
5 REPLIES
Mohieddin Kharnoub
Honored Contributor

Re: Syslog Messages Question

Hi

Would you attach the config of one of these switches like the 5400 after removing any sensitive information.

Good Luck !!!
Science for Everyone
Scooterbum
Occasional Contributor

Re: Syslog Messages Question

Attached is config file
thanks for looking
Evert Goor
Trusted Contributor

Re: Syslog Messages Question

Look for a cisco router/switch in your network. Mostly those are the ones who are doing a tftp config file broadcast.
Evert Goor
Trusted Contributor

Re: Syslog Messages Question

forgot the fix. if it is a cisco.

Enter the "no service config" command to disable the autoloading of configuration files

Then write to memory and copy running-config to startup-config and you should be good to go.
Mohieddin Kharnoub
Honored Contributor

Re: Syslog Messages Question

Hi

I don't see any logging host configured on the attached configuration,
so i don't think its the Procurve switch is sending these syslog messages.

Whats your Syslog software you are using?

Also previous post by Evert makes sense to me.

Good Luck !!!
Science for Everyone