HPE Community
Switches, Hubs, and Modems
1753970 Members
7987 Online
108811 Solutions
New Discussion

Technical details of SAN switch

 
tr10385
Frequent Advisor

‎04-19-2006 02:31 AM

‎04-19-2006 02:31 AM

Technical details of SAN switch

Could any pl. provide enough technical details of B-switches A7393A. Is this switch has any management software pre-installed, if so how to configure the snmp traps on this switch.

i need to configure this switch as one of the monitored device using the HP-ISEE software installed another host installed on windows os. ISEE/OSEM acts as a event handler for the events generated by event generator software(management software) configured on this device.

0 Kudos
1 REPLY 1
Sheldon Smith
HPE Pro

‎04-20-2006 03:10 AM

‎04-20-2006 03:10 AM

Re: Technical details of SAN switch

All the manuals you would need.

http://h20000.www2.hp.com/bizsupport/TechSupport/DocumentIndex.jsp?〈=en&cc=us&contentType=SupportManual&docIndexId=179166&prodTypeId=12169&prodSeriesId=454522〈=en&cc=us

Look at the Fabric OS 5.x Admin Guide and Release Notes. Those should have what you want.

Note: While I am an HPE Employee, all of my comments (whether noted or not), are my own and are not any official representation of the company

Accept or Kudo

0 Kudos
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.