Switches, Hubs, and Modems
1748169 Members
4215 Online
108758 Solutions
New Discussion юеВ

Re: Thanks I got Solution.

 
Charanjit Singh
Occasional Contributor

Thanks I got Solution.

Hi

I have renamed the eth0 to eth2 and eth1 to eth3 and did with eth2 and eth3 vice versa of ifcfg-eth* files in linux and in ifcfg-eth* configuration files I changed the MAC addresses with their respective ethernet cards, I rebooted it and it solved my problem . Thanks for solution.

Regards
CJ
2 REPLIES 2
Navya Sri
Frequent Advisor

Re: Thanks I got Solution.

Hi Charanjit Singh,

I believe you intended to reply here:
http://h30499.www3.hp.com/t5/Switches-Hubs-Modems-Legacy-ITRC/Problem-in-switch-HP-BLc-GbE2c-LY-2-3-Switch/m-p/5274407#M30027

Please click on "Reply" instead of "Start New Thread" while replying to an existing thread. It is difficult for forum members to backtrack to the original query, if you start a new thread.

Since this is a duplicate thread, I suggest you to close this duplicate thread using "Close thread" and continue your dicussion in the above mentioned thread.


Thanks&Regards,
Navya.

Charanjit Singh
Occasional Contributor

Re: Thanks I got Solution.

Thanks, apologies I will take care in future
This Thread is Closed..