Switches, Hubs, and Modems
cancel
Showing results for 
Search instead for 
Did you mean: 

Time Sync & Setting on HP Procurve switches

felix simon
Occasional Contributor

Time Sync & Setting on HP Procurve switches

Time setting are not saved on HP Procurve switches after reboot

can any one tell how set time & time syncronization on HP Procurve switches
5 REPLIES
Mohieddin Kharnoub
Honored Contributor

Re: Time Sync & Setting on HP Procurve switches

Hi

TimeP and SNTP are the options you have with ProCurve switches.

More info:
ftp://ftp.hp.com/pub/networking/software/3500-5400-6200-MCG-0207-K_12_XX-9-time.pdf

Good Luck !!!
Science for Everyone
felix simon
Occasional Contributor

Re: Time Sync & Setting on HP Procurve switches

Thanks for the answere - but i need more help

Thnaks
Joel Belizario
Trusted Contributor

Re: Time Sync & Setting on HP Procurve switches

What network time protocol are you trying to implement? Everything should be in the product manuals but we can help with further clarification if you can narrow your issue down a bit further.
felix simon
Occasional Contributor

Re: Time Sync & Setting on HP Procurve switches

if i implement SNTP protocol, how do i set i setup a sntp server, is this a seperate server dedicated to sntp or any pc in the subnet set as a sntp service running.

TIMEP & SNTP - which is the easier way to implement
Joel Belizario
Trusted Contributor

Re: Time Sync & Setting on HP Procurve switches

The answer is dependent upon how you've setup time synchronization in your environment, have a look at the article below and it may clarify some things for you.

http://www.windowsnetworking.com/articles_tutorials/Configuring-Windows-Time-Service.html

Can't comment on the difference between SNTP vs TimeP as I haven't come across a TimeP implementation before.

If you just want to sync time to a server or workstation, have a look at the following utility:

http://sourceforge.net/projects/nettime/

Be aware though it is not designed for use under Windows 2003.