Transceiver Issue - Not picking up 1Gb Connection

[Kristopher]

I have a Procuve 2524 switch with 2 1Gb RJ45 100/1000 T-Trancievers installed.

One tranciever i connected right away to a 1Gb LAN card on my server and it connected at 1Gb.

The other tranciever I had connected to a 100Mb LAN Card on another server. I've recently installed a Gb Card into this server but the connection still comes up at 100Mb and will not see a 1G connection.

Do I have to reboot the switch in order for the tranceiver to be restarted and acknowledge the 1Gb connection?

I suppose the issue could be wiring but i've change the wiring a few times trying to get as few jumps as possible

Any ideas anyone?

The lan card installed is an Intel 82544GC Card with the latest Ver 9 drivers/proset.

[Victor_68]

Hi,

Have you tried to set the speed static on that port ?

That might work.

Cheers
Victor