Switches, Hubs, and Modems
cancel
Showing results for 
Search instead for 
Did you mean: 

Trunk between 9300 and 5300

Jonathan Axford
Trusted Contributor

Trunk between 9300 and 5300

Hi Guys,

I have set up my PCM2.0+ now and run the network config report.
It reports errors on the trunk link between 9300 and 5300 switches.

I used the following commands to set up the trunks

9300 :

Trunk switch ethe 3/1 to 3/2
Trunk Deploy

5300:

trunk a1,a2 trk1 trunk

Is this the right way about it???

The network report is basically saying that the 9300 port is speed (1000000000) and the 5300 is speed (2000000000). and that the speed should be the same on both sides of the link.
Where there is a will there is a way...
2 REPLIES
lamdor
Occasional Visitor

Re: Trunk between 9300 and 5300

Can you please attach the report file.
Jonathan Axford
Trusted Contributor

Re: Trunk between 9300 and 5300

Hi here is the report, The first few lines show the error i am concerned with....

Cheers
Where there is a will there is a way...