Aruba & ProVision-based
1748070 Members
5362 Online
108758 Solutions
New Discussion

Re: Trunking with 3 different Speed connections... Any suggestions?

 
Kennygthatsme
New Member

Re: Trunking with 3 different Speed connections... Any suggestions?

Thanks again everyone for your suggestions, they have really helped me.

I will try trunking the Laser with the Microwave as one or the other should be able to withstand the load were the other to drop out due to bad weather.

I will post my results as soon as I have completed the test, but it may take me some time to implement.

Cheers,

Ken
hpe_neuling
Occasional Contributor

Re: Trunking with 3 different Speed connections... Any suggestions?

Hi !

Can you please abour your End-Solution ?

Thanks! :-)

... someone in the same Situation :-)