Switches, Hubs, and Modems
cancel
Showing results for 
Search instead for 
Did you mean: 

Trunking with a Mitel 3300 ICP

Seth Horila
Advisor

Trunking with a Mitel 3300 ICP

We have a Mitel 3300 ICP telephone switch. I would like to set up trunking to the phone switch for redundancy. I have trunked between HP devices, but not to a non-HP device. I was wondering if this was possible and what config would make this happen? I am not aware of any trunking options on the 3300, but there are 2 ports. I am afraid of creating a loop. The 3300 is connected to a 5300XL switch by copper.

Thanks.