Switches, Hubs, and Modems
cancel
Showing results for 
Search instead for 
Did you mean: 

Unable to upload config via TFTP from a member of the stack

DSV12
Frequent Advisor

Unable to upload config via TFTP from a member of the stack

Two 2510G (fw. Y_11_16.swi) are configured in a stack. SW-0 (commander) has IP address, SW-1 (member) - has not.

I CAN to DOWNLOAD files (for example, new firmware) on member switch by tftp without any troubles:

sw-1# copy tftp flash 1.1.1.1 Y_11_16.swi


But when I try to UPLOAD some file (e.g. config) to tftp-server, I get:

sw-1#: copy startup-config tftp 1.1.1.1 my.cfg
00000K Peer unreachable.

From commander upload works perfectly.

Why I can't to UPLOAD file from stack member?
1 REPLY
BGP4
Advisor

Re: Unable to upload config via TFTP from a member of the stack

check if "tftp client" and "tftp server" is set over CLI

check if the filenames are correct

check permissions, firewall

try it with an ip set

 

maybe the tftp client is just switched off...

Kind regards
BGP4