Unreachable Devices in PCM2.0+

[Alen Ahja]

Hi everybody,

i have a phenomenon.
I have updated PCM from 1.6+ to 2.0+ and now some switches were shown as Unreachable but the aren't - because i can ping them and also the server, where PCM is installed, can ping them in the command line.

Can somebody help me why it is?

Thanx for help.

Alen Ahja

[Mugilvannan]

Hi,
Try to configure again the switches in PCM 2.0+ and let me knw.

Note:
1. ProCurve Manager version 2.0 (PCM 2.0) is not backward compatible with earlier versions. Once you have installed PCM 2.0 on the management server, you cannot revert to a previously installed version.
2. ProCurve Manager cannot be run on the same workstation as HP TopTools.

Thanks,
Mugil

[Alen Ahja]

Hi!

I found my problem: There were wrong settings in the SNMP settings, which the PCM need to communicate. After resetting the SNMP settings manually on the switches it works fine.

Thanx for help.

Alen Ahja