- Community Home
- >
- Networking
- >
- Legacy
- >
- Switches, Hubs, Modems
- >
- VLAN 2 VLAN with 2 HP Procurve 4108GL
Switches, Hubs, and Modems
1752701
Members
5552
Online
108789
Solutions
Forums
Categories
Company
Local Language
юдл
back
Forums
Discussions
Forums
- Data Protection and Retention
- Entry Storage Systems
- Legacy
- Midrange and Enterprise Storage
- Storage Networking
- HPE Nimble Storage
Discussions
Discussions
Discussions
Forums
Forums
Discussions
юдл
back
Discussion Boards
Discussion Boards
Discussion Boards
Discussion Boards
- BladeSystem Infrastructure and Application Solutions
- Appliance Servers
- Alpha Servers
- BackOffice Products
- Internet Products
- HPE 9000 and HPE e3000 Servers
- Networking
- Netservers
- Secure OS Software for Linux
- Server Management (Insight Manager 7)
- Windows Server 2003
- Operating System - Tru64 Unix
- ProLiant Deployment and Provisioning
- Linux-Based Community / Regional
- Microsoft System Center Integration
Discussion Boards
Discussion Boards
Discussion Boards
Discussion Boards
Discussion Boards
Discussion Boards
Discussion Boards
Discussion Boards
Discussion Boards
Discussion Boards
Discussion Boards
Discussion Boards
Discussion Boards
Discussion Boards
Discussion Boards
Discussion Boards
Discussion Boards
Discussion Boards
Discussion Boards
Discussion Boards
Discussion Boards
Discussion Boards
Blogs
Information
Community
Resources
Community Language
Language
Forums
Blogs
Topic Options
- Subscribe to RSS Feed
- Mark Topic as New
- Mark Topic as Read
- Float this Topic for Current User
- Bookmark
- Subscribe
- Printer Friendly Page
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
тАО10-02-2003 08:11 PM
тАО10-02-2003 08:11 PM
VLAN 2 VLAN with 2 HP Procurve 4108GL
Hi,
not so much experience with VLAN configuration.
How should i configure vlan to vlan with 2 HP Procurve 4108GL, they are linked with 1gb fiber. There is default_vlan in both of the switches in the same subnet and that is working, now i want to make another vlan. The idea of this is that we have backup connection on house 1 and that should be used from the house 2, separated from the defaul_vlan.
not so much experience with VLAN configuration.
How should i configure vlan to vlan with 2 HP Procurve 4108GL, they are linked with 1gb fiber. There is default_vlan in both of the switches in the same subnet and that is working, now i want to make another vlan. The idea of this is that we have backup connection on house 1 and that should be used from the house 2, separated from the defaul_vlan.
2 REPLIES 2
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
тАО10-03-2003 01:08 PM
тАО10-03-2003 01:08 PM
Re: VLAN 2 VLAN with 2 HP Procurve 4108GL
If you add another vlan on both switch, just configure the cascading port (which is the 1gb fiber)as tagged vlan to the next vlan that you've created.
Mike
Mike
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
тАО10-04-2003 01:44 AM
тАО10-04-2003 01:44 AM
Re: VLAN 2 VLAN with 2 HP Procurve 4108GL
To set up a VLAN :
On each, run :
enable
config term
ip routing
router rip
vlan 100 (for example)
untag a1-a24 (for example)
tag b1 (for example)
ip address 172.16.100.1/24
vlan 200 (for example)
untag c1-c24 (for example)
tag b1 (for example)
ip address 172.16.200.1/24
write mem
Thus, we made a first vlan on a1 to a24, a second vlan on c1 to c24. We then specified that b1 could be part of each vlan. Doing so on each Procurve would result on both having VLAN 100 and 200 not communicating between each other, except through b1. In your case, if you just want to have a port, then you can make a vlan on each switch, and tag as suggested your fiber port to each vlan.
Don't forget that, once you made vlans, you need a router somewhere on the tagged port, if you want VLANS to be able to communicate with each other, as they will be in different subnets...
hth
J
On each, run :
enable
config term
ip routing
router rip
vlan 100 (for example)
untag a1-a24 (for example)
tag b1 (for example)
ip address 172.16.100.1/24
vlan 200 (for example)
untag c1-c24 (for example)
tag b1 (for example)
ip address 172.16.200.1/24
write mem
Thus, we made a first vlan on a1 to a24, a second vlan on c1 to c24. We then specified that b1 could be part of each vlan. Doing so on each Procurve would result on both having VLAN 100 and 200 not communicating between each other, except through b1. In your case, if you just want to have a port, then you can make a vlan on each switch, and tag as suggested your fiber port to each vlan.
Don't forget that, once you made vlans, you need a router somewhere on the tagged port, if you want VLANS to be able to communicate with each other, as they will be in different subnets...
hth
J
You can lean only on what resists you...
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.
News and Events
Support
© Copyright 2024 Hewlett Packard Enterprise Development LP