VLAN Configuration

[Andy Haigh_1]

I have just setup my first VLAN for voice and everything seems to be working correctly.

Here are the two configs, would someone be kind enough to sanity check them.

Thanks

Andy

HP 2626

Running configuration:

; J4900A Configuration Editor; Created on release #H.10.67

hostname "HP ProCurve Switch 2626"
time timezone 600
time daylight-time-rule Southern-Hemisphere
cdp run
qos dscp-map 101110 priority 6
sntp server 172.22.48.6
ip routing
snmp-server community "public" Unrestricted
vlan 1
name "DEFAULT_MAIN"
untagged 1-5,7-26
ip address 192.168.0.30 255.255.255.0
no untagged 6
ip igmp
exit
vlan 100
name "VOIP"
untagged 6
ip address 10.5.253.254 255.255.255.0
qos priority 6
ip helper-address 10.5.253.100
tagged 5,25
voice
ip igmp
exit
fault-finder bad-driver sensitivity high
fault-finder bad-transceiver sensitivity high
fault-finder bad-cable sensitivity high
fault-finder too-long-cable sensitivity high
fault-finder over-bandwidth sensitivity high
fault-finder broadcast-storm sensitivity high
fault-finder loss-of-link sensitivity high
qos device-priority 10.5.253.100 priority 6
ip route 0.0.0.0 0.0.0.0 192.168.0.1
no stack
spanning-tree
spanning-tree priority 1
ip ssh version 1-or-2


HP 2520 PoE

Running configuration:

; J9137A Configuration Editor; Created on release #S.14.03

hostname "ProCurve Switch 2520-8-PoE"
qos dscp-map 101110 priority 6
vlan 1
name "DEFAULT_VLAN"
untagged 1-10
ip address 192.168.0.40 255.255.255.0
ip igmp
exit
vlan 100
name "VOIP"
ip address 10.5.253.110 255.255.255.0
tagged 8-9
voice
ip igmp
exit
fault-finder bad-driver sensitivity high
fault-finder bad-transceiver sensitivity high
fault-finder bad-cable sensitivity high
fault-finder too-long-cable sensitivity high
fault-finder over-bandwidth sensitivity high
fault-finder broadcast-storm sensitivity high
fault-finder loss-of-link sensitivity high
fault-finder duplex-mismatch-HDx sensitivity high
fault-finder duplex-mismatch-FDx sensitivity high
qos type-of-service diff-services
ip route 0.0.0.0 0.0.0.0 192.168.0.1
snmp-server community "public" Unrestricted
spanning-tree