Switches, Hubs, and Modems
cancel
Showing results for 
Search instead for 
Did you mean: 

VLAN PROBLEM

sathyaseelan
Occasional Visitor

VLAN PROBLEM

IN MY COMPANY SETUP I WANT TO CREATE ONE MORE VLAN .
I MENTIONED THE 2824 FULL DETAILS

VLAN1 UNTAGGED 13-16,24
NO IP ADDRESS
NO UNTAGGED 1-12,17-23
IP PROXY-ARP

VLAN 10
UNTAGGED 1-8,10-12,20,22-23
IP ADDRESS 192.168.1.71 255.255.255.0
IP PROXY-ARP

VLAN 11
IP ADDRESS 192.168.2.100 255.255.255.0
TAGGED 9,18
IP PROXY-ARP

VLAN 20
IP ADDRESS 192.168.3.100 255.255.255.0
TAGGED 9,19
IP PROXY-ARP

VLAN 30
IP ADDRESS 192.168.4.100 255.255.255.0
TAGGED 9,17
IP PROXY-ARP

VLAN 50
IP ADDRESS 192.168.5.100 255.255.255.0
TAGGED 9,21
IP PROXY-ARP

NOW I WANT TO CREATE VLAN 51 WITH
IP ADD 192.168.7.100 AND WE ADD A FIBRE LINK IN THE 2824 SWITCH WITH 24 TH PORT

THE OTHER FIBRE END CONNECTED TO 1800 SWITCH

WHAT THE CONFIGURATION SETUP TO BE ADDED ON BOTH SIDES

EXPECTING VERY FAST AND GOOD FEED BACK
1 REPLY
bolli
Frequent Advisor

Re: VLAN PROBLEM

Hello,
connect to the switch 2824. Then open the CLI.
Type conf enter,
vlan 51 enter,
ip add 192.168.7.100/24 enter,

(if only members of VLAN 51 are connectet to the 1800)
unt 24 enter,

(if the are members of many VLANs connectet to the 1800)
tag 24 (this command in any VLAN they are in).
Maby you must set the uplink ports not on Auto also on 1000 FDx.

Regards