- Community Home
- >
- Networking
- >
- Legacy
- >
- Switches, Hubs, Modems
- >
- Re: VLAN config
Switches, Hubs, and Modems
1752801
Members
5740
Online
108789
Solutions
Forums
Categories
Company
Local Language
back
Forums
Discussions
Forums
- Data Protection and Retention
- Entry Storage Systems
- Legacy
- Midrange and Enterprise Storage
- Storage Networking
- HPE Nimble Storage
Discussions
Discussions
Discussions
Forums
Discussions
back
Discussion Boards
Discussion Boards
Discussion Boards
Discussion Boards
- BladeSystem Infrastructure and Application Solutions
- Appliance Servers
- Alpha Servers
- BackOffice Products
- Internet Products
- HPE 9000 and HPE e3000 Servers
- Networking
- Netservers
- Secure OS Software for Linux
- Server Management (Insight Manager 7)
- Windows Server 2003
- Operating System - Tru64 Unix
- ProLiant Deployment and Provisioning
- Linux-Based Community / Regional
- Microsoft System Center Integration
Discussion Boards
Discussion Boards
Discussion Boards
Discussion Boards
Discussion Boards
Discussion Boards
Discussion Boards
Discussion Boards
Discussion Boards
Discussion Boards
Discussion Boards
Discussion Boards
Discussion Boards
Discussion Boards
Discussion Boards
Discussion Boards
Discussion Boards
Discussion Boards
Discussion Boards
Blogs
Information
Community
Resources
Community Language
Language
Forums
Blogs
Topic Options
- Subscribe to RSS Feed
- Mark Topic as New
- Mark Topic as Read
- Float this Topic for Current User
- Bookmark
- Subscribe
- Printer Friendly Page
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
10-07-2008 05:42 AM
10-07-2008 05:42 AM
VLAN config
I have two 2900 (24 and 48 port) switches connected on A2 and A3.
My firewall / router has routes configured for each VLAN subnet for legacy compatibility as I migrate our IDFs to new VLANs.
The 24 port connects to IDFs 1, 2, 3, 4, and the 48 port connects to IDFs 5 and 6.
Legacy net is 10.0.0.0/24. Each VLAN / IDF net is 10.10.1.0/24, 10.10.2.0/24, etc.
Config below...
Basically, if connected to the 48 port on VLAN 6, I can not talk to the 24 port switch, but I can talk to everything else.
2900-24G:
Running configuration:
; J9049A Configuration Editor; Created on release #T.13.23
hostname "MDF-2900-24G"
snmp-server location "MDF-LB-2nd-Floor"
time timezone -400
time daylight-time-rule Continental-US-and-Canada
module 1 type J86xxA
module 3 type J90XXA
ip default-gateway 10.0.0.1
ip routing
vlan 1
name "DEFAULT_VLAN"
untagged 1-24
ip address 10.0.0.2 255.255.255.0
tagged A1-A4
exit
vlan 11
name "IDF-1"
ip helper-address 10.0.0.5
ip address 10.10.1.1 255.255.255.0
exit
vlan 12
name "IDF-2"
ip helper-address 10.0.0.5
ip address 10.10.2.1 255.255.255.0
exit
vlan 10
name "MDF"
no ip address
exit
vlan 13
name "IDF-3"
ip helper-address 10.0.0.5
ip address 10.10.3.1 255.255.255.0
exit
vlan 14
name "IDF-4"
ip helper-address 10.0.0.5
ip address 10.10.4.1 255.255.255.0
exit
vlan 15
name "IDF-5"
no ip address
exit
vlan 16
name "IDF-6"
no ip address
exit
no stack
no ip ssh
spanning-tree
password manager
2900-48G:
Running configuration:
; J9050A Configuration Editor; Created on release #T.13.23
hostname "MDF-2900-48G"
snmp-server location "MDF-LB-2nd-Floor"
time timezone -400
time daylight-time-rule Continental-US-and-Canada
module 1 type J86yyA
module 2 type J86xxA
module 3 type J90XXA
ip default-gateway 10.0.0.1
ip routing
vlan 1
name "DEFAULT_VLAN"
untagged 2-45,47-48
ip address 10.0.0.3 255.255.255.0
tagged A1-A4
no untagged 1,46
exit
vlan 11
name "IDF-1"
no ip address
exit
vlan 12
name "IDF-2"
no ip address
exit
vlan 10
name "MDF"
no ip address
exit
vlan 13
name "IDF-3"
no ip address
exit
vlan 14
name "IDF-4"
no ip address
exit
vlan 15
name "IDF-5"
ip helper-address 10.0.0.5
ip address 10.10.5.1 255.255.255.0
exit
vlan 16
name "IDF-6"
untagged 1,46
ip helper-address 10.0.0.5
ip address 10.10.6.1 255.255.255.0
exit
no stack
no ip ssh
ip route 0.0.0.0 0.0.0.0 10.0.0.1
spanning-tree
password manager
My firewall / router has routes configured for each VLAN subnet for legacy compatibility as I migrate our IDFs to new VLANs.
The 24 port connects to IDFs 1, 2, 3, 4, and the 48 port connects to IDFs 5 and 6.
Legacy net is 10.0.0.0/24. Each VLAN / IDF net is 10.10.1.0/24, 10.10.2.0/24, etc.
Config below...
Basically, if connected to the 48 port on VLAN 6, I can not talk to the 24 port switch, but I can talk to everything else.
2900-24G:
Running configuration:
; J9049A Configuration Editor; Created on release #T.13.23
hostname "MDF-2900-24G"
snmp-server location "MDF-LB-2nd-Floor"
time timezone -400
time daylight-time-rule Continental-US-and-Canada
module 1 type J86xxA
module 3 type J90XXA
ip default-gateway 10.0.0.1
ip routing
vlan 1
name "DEFAULT_VLAN"
untagged 1-24
ip address 10.0.0.2 255.255.255.0
tagged A1-A4
exit
vlan 11
name "IDF-1"
ip helper-address 10.0.0.5
ip address 10.10.1.1 255.255.255.0
exit
vlan 12
name "IDF-2"
ip helper-address 10.0.0.5
ip address 10.10.2.1 255.255.255.0
exit
vlan 10
name "MDF"
no ip address
exit
vlan 13
name "IDF-3"
ip helper-address 10.0.0.5
ip address 10.10.3.1 255.255.255.0
exit
vlan 14
name "IDF-4"
ip helper-address 10.0.0.5
ip address 10.10.4.1 255.255.255.0
exit
vlan 15
name "IDF-5"
no ip address
exit
vlan 16
name "IDF-6"
no ip address
exit
no stack
no ip ssh
spanning-tree
password manager
2900-48G:
Running configuration:
; J9050A Configuration Editor; Created on release #T.13.23
hostname "MDF-2900-48G"
snmp-server location "MDF-LB-2nd-Floor"
time timezone -400
time daylight-time-rule Continental-US-and-Canada
module 1 type J86yyA
module 2 type J86xxA
module 3 type J90XXA
ip default-gateway 10.0.0.1
ip routing
vlan 1
name "DEFAULT_VLAN"
untagged 2-45,47-48
ip address 10.0.0.3 255.255.255.0
tagged A1-A4
no untagged 1,46
exit
vlan 11
name "IDF-1"
no ip address
exit
vlan 12
name "IDF-2"
no ip address
exit
vlan 10
name "MDF"
no ip address
exit
vlan 13
name "IDF-3"
no ip address
exit
vlan 14
name "IDF-4"
no ip address
exit
vlan 15
name "IDF-5"
ip helper-address 10.0.0.5
ip address 10.10.5.1 255.255.255.0
exit
vlan 16
name "IDF-6"
untagged 1,46
ip helper-address 10.0.0.5
ip address 10.10.6.1 255.255.255.0
exit
no stack
no ip ssh
ip route 0.0.0.0 0.0.0.0 10.0.0.1
spanning-tree
password manager
1 REPLY 1
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
10-07-2008 06:24 AM
10-07-2008 06:24 AM
Re: VLAN config
Included route statement.
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.
News and Events
Support
© Copyright 2024 Hewlett Packard Enterprise Development LP