Email Subscription Notifications Suspended Temporarily
We are in the process of making navigation in the Servers and Operating Systems forums simpler and more direct. While doing this, we have to temporarily suspend email notifications for subscriptions. If you are subscribed to one or more discussion boards or blogs in the community, please check them daily to see new content. Notifications will be turned back on in a few days. We apologize for any inconvenience this may cause. Thanks, Warren_Admin
Switches, Hubs, and Modems
cancel
Showing results for 
Search instead for 
Did you mean: 

VLAN on Procurve 2650 , 4000m and 1600m

Torsten Zimmermann
Occasional Contributor

VLAN on Procurve 2650 , 4000m and 1600m

I have a big problem ....

there a 2 vlans

vlan 2 on the 2650 and 4000m

vlan 3 on the 2650 and 1600m

the devices are trunked.... they are all in the default_vlan 192.168.1.0

there are clients in the vlan 2 192.168.7.0 and some in the vlan 3 192.168.6.0 ....

the trunked ports are also in these vlans...

now, it is possible to ping between the devices in the default vlan ... but it isn't possible to ping between the clients in the vlans, which are distributed on the switches ....

is there anything important i've forgotten ?

2 REPLIES
Dylan Roehrig
Occasional Contributor

Re: VLAN on Procurve 2650 , 4000m and 1600m

can you post up your vlan configuration?

show vlans
show vlan 1
show vlan 2
show vlan 3
Torsten Zimmermann
Occasional Contributor

Re: VLAN on Procurve 2650 , 4000m and 1600m

hey it's working !

i reconfigured all of the devices, i think it's important in which order the switches are configured


so long ...