VLAN on Procurve 2650 , 4000m and 1600m

[Torsten Zimmermann]

I have a big problem ....

there a 2 vlans

vlan 2 on the 2650 and 4000m

vlan 3 on the 2650 and 1600m

the devices are trunked.... they are all in the default_vlan 192.168.1.0

there are clients in the vlan 2 192.168.7.0 and some in the vlan 3 192.168.6.0 ....

the trunked ports are also in these vlans...

now, it is possible to ping between the devices in the default vlan ... but it isn't possible to ping between the clients in the vlans, which are distributed on the switches ....

is there anything important i've forgotten ?

[Dylan Roehrig]

can you post up your vlan configuration?

show vlans
show vlan 1
show vlan 2
show vlan 3

[Torsten Zimmermann]

hey it's working !

i reconfigured all of the devices, i think it's important in which order the switches are configured


so long ...