VLAN over HP Procurve Switch 1700 and 5308xl

[Stolz]

Hello,

I connected a HP Procurve Switch 1700 with a 5308xl. I want to use on both switches three VLANs: VLAN-IDs: 1, 2, 3
I connected the 1700-switch with Port 24 to Port B14 of the 5308xl-switch.
I configured the ports like this:
P24 (1700): VLAN aware enabled, Packet Type Tagged only, PVID none
B14 (5308xl): VLAN 1 Tagged, VLAN2 Tagged, VLAN3 Tagged
I get a connection among VLAN 1 on both switches, but not among VLAN 3.
How to configure this right?

Thanks Peter Stolz

[cenk sasmaztin · Accepted solution]

hi Peter
you can make vlan config on 5300
B14(5308xl):vlan 1 untag ,vlan 2 tag,vlan 3 tag

p24(1700):vlan aware enable ,all(no tag only),and port24 all vlan member.

cenk.

[Stolz]

Thanks, this solved my problem!

[Stolz]

The answer solved my Problem. P24 wasn't member of all three VLANs and I switched tagged to untagged on B14.