Switches, Hubs, and Modems
cancel
Showing results for 
Search instead for 
Did you mean: 

VLAN setup between 3500 L3 and 2500 L2 switch, pls verify the config

Roy Asoka
Occasional Contributor

VLAN setup between 3500 L3 and 2500 L2 switch, pls verify the config

Hi all, pls help

This is my setup, I am replacing PIX and Cisco switches with HP procurve set. (it is still in a lab status)

The HP 3500 config below,
3500 port 1 => ASA firewall inside address 10.9.135.1
3500 port 45 => will be 2500 port 1
3500 port 48 => testing with trunking
3500 port 3-14 VLAN 129
3500 port 15-20 VLAN 130
3500 port 21-34 VLAN 131
3500 port 35-38 VLAN 132

I want all these VLANs to be on 2500 switch too,

Is this VLAN 135 set up is correct , pls help me to verify config in 3500 and suggest a config for 2500


switch-interconnect Trk1
trunk 48 Trk1 Trunk
ip default-gateway 10.9.135.1
ip routing
vlan 1
name "DEFAULT_VLAN"
untagged 39-44,Trk1
tagged 45-47
no untagged 1-38
exit
vlan 129
untagged 3-14
ip address 10.9.129.1 255.255.255.0
tagged 1-2,45-47,Trk1
exit
vlan 130
untagged 15-20
ip address 10.9.130.1 255.255.255.0
tagged 1-2,45-47,Trk1
exit
vlan 131
untagged 21-34
ip address 10.9.131.1 255.255.255.0
tagged 1-2,45-47,Trk1
exit
vlan 132
untagged 35-38
ip address 10.9.132.1 255.255.255.0
tagged 1-2,45-47,Trk1
exit
vlan 135
name "VLAN135"
untagged 1-2,45-47
ip address 10.9.135.2 255.255.255.0
tagged Trk1
exit
logging 10.9.129.20
logging facility local7
include-credentials
spanning-tree
spanning-tree Trk1 priority 4
no autorun

Thanks in advance
Roy
1 REPLY
GhostDog
Advisor

Re: VLAN setup between 3500 L3 and 2500 L2 switch, pls verify the config

Do you realy need that vl 135? You can use vl1 as a default. All other options should be working.
The same config you'll need for 2500.
You can use GVRP to simplify vlan configuration, so you can skip "vlan X tag" on both interswitch ports.