VRRP + Dynamic routing 5400 + 3500

[Caroline Hodkinson]

I'm looking to enable VRRP and dynamic routing, however the HP documentation ( http://bizsupport2.austin.hp.com/bc/docs/support/SupportManual/c02610033/c02610033.pdf ) pg 6-38 recommends against it on the same VLAN/int because of "operation issues".

Is this just because of the dynamic routing convergence time being less than the VRRP failback?
(which can be avoided as per http://h40060.www4.hp.com/procurve/uk/en/pdfs/application-notes/How_to_configure_VRRP_Preempt_Delay_on_ProCurve_switches_Configuration_note_Dec_08_EMEA_Eng_A4.pdf )

Or have I missed something else?