Email Subscription Notifications Suspended Temporarily
We are in the process of making navigation in the Servers and Operating Systems forums simpler and more direct. While doing this, we have to temporarily suspend email notifications for subscriptions. If you are subscribed to one or more discussion boards or blogs in the community, please check them daily to see new content. Notifications will be turned back on in a few days. We apologize for any inconvenience this may cause. Thanks, Warren_Admin
Switches, Hubs, and Modems
cancel
Showing results for 
Search instead for 
Did you mean: 

VRRP Issue

Ram2k3
Occasional Contributor

VRRP Issue

 

Hi,

 

 I have two Switch E3500yl CORE-SW01 & CORE-SW02 with multiple Vlans.Please find the attached Diagram.Iam trying to Configure VRRP on both switches.If Core-SW01 fails Core-SW02 its coming up but Core-SW01 Switch Vlans Ex:HR vlan or AC Vlan bring down Core-SW02 that paricular vlan showing Master but Host can't comunicate Server Vlans.

 

Please help me....

1 REPLY
EckerA
Respected Contributor

Re: VRRP Issue

Hi,

from your vrrp.doc it only doesn't work, if the link  fails?

You can achieve this with the track interface command, but this isn't available if you configure your master as owner. But if you configrue it as backup with high priority you can do this, but then you need a third ip adress.

 

example:

 

vlan 10
   name "VLAN10"
   untagged 7
   ip address 192.168.10.2 255.255.255.0
   tagged 1,19
   exit
vlan 10
   vrrp vrid 10
      backup
      virtual-ip-address 192.168.10.1 255.255.255.0
      priority 254
      track interface 19
      enable
      exit
   exit

 

the backup vrrp system  can stay as it is..

 

hth

Alex