Switches, Hubs, and Modems
cancel
Showing results for 
Search instead for 
Did you mean: 

Vlan Routing Configuration on 5304xl

Bilotta Alessio
Occasional Advisor

Vlan Routing Configuration on 5304xl

network based on vlan10.

vlan10 ip on switch bulding 1 is: 192.168.10.1 (default gateway)
vlan10 ip on switch bulding 2 is: 192.168.10.2
vlan10 ip on switch bulding 3 is: 192.168.10.3
vlan10 ip on switch bulding 4 is: 192.168.10.25

hostâ s group â a & bâ are working on same vlan10 with static ip: 192.168.10.x and gt: 192.168.10.1

hostâ s â aâ are able to go to internet: dns 192.168.10.6 alt dns: 192.168.10.9 and they have not to be able to go to remote lan .
hostâ sâ bâ are able to go to remote lan: dns 192.168.10.5 alt dns: 192.168.10.7 and they have not to be able to go to internet.

hostâ s â a & bâ are able to communicate each other.

all switches have a static table routing:

0.0.0.0/0 192.168.10.4 all traffic goes to remote lan.
10.0.0.0/8 192.168.10.11 rest of traffic goes to internet.

everything is working really fine.

now i need to add more hostâ s so i will need more ipâ s. i created more vlanâ â s and now my network has 4 vlanâ s but i do not know how to configure the switches and vlanâ s.

vlan10 192.168.10.x bulding 1 (hostâ s a & b)
vlan20 192.168.20.x bulding 2 (hostâ s a & b)
vlan30 192.168.30.x bulding 3 (hostâ s a & b)
vlan40 192.168.40.x bulding 4 (hostâ s a & b)

i would like to have same services on both groupâ s of hostâ s a & b and of course they need to communicate each other (i mean hostâ s a & b are able to communicate with all other hostâ s on different vlanâ s). how can i configure my switches?
my network should be like the schematic 2 .

1 REPLY
Bilotta Alessio
Occasional Advisor

Re: Vlan Routing Configuration on 5304xl

The test is wrong