Switches, Hubs, and Modems
Showing results for 
Search instead for 
Did you mean: 

Voltaire InfiniBand With OEL

Super Advisor

Voltaire InfiniBand With OEL

Good day,

We have two Voltaire InfiniBand 4X DDR 24P Internal Managed Switch with 2 servers connected to this switch. I installed the driver and now when I write ifconfig I can see ib0 and ib1 on each server. When I login to the switch console I can see the ports up "Green". My issue is how can I configure them in private network with tape drive?

Every time I give ib0 an IP address the system lose it's default route and it will not be accessed by eth0.

If you have any best practise or how to or technical user guide I will be thanks full.

Success seems to be connected with action. Successful people keep moving. They make mistakes, but they don't quit.