Switches, Hubs, and Modems
cancel
Showing results for 
Search instead for 
Did you mean: 

WESM ZL Rebooting

NOV Noobie
Occasional Advisor

WESM ZL Rebooting

I am having issues with a WESM ZL rebooting every 15-20 minutes during business hour only, I first I thought it was a Policy Group that I setup for the wireless guest acccess but since then I have wiped the config completly off the WESM (Just an IP address and a Default Gateway) and it still continious to do the same. I was wondering if someone has encountered the issue, I have similar deployments at other sites (some with a larger number of users) with no issues, I have replaced/tried with WESM's, tried different slots and chasis. I also check with building electrician to make sure if wasn't being a facilites envorimental issue (Dirty Power, ETC) and no luck, any suggestions?
5 REPLIES
Trevor Commulynx
Regular Advisor

Re: WESM ZL Rebooting

what version of firmware are you running? I would ensure that logging is enabled, probably to external syslog server and with that information log a call with HP technical support.

Most likley a bogus WESM.

Trev.
NOV Noobie
Occasional Advisor

Re: WESM ZL Rebooting

Thanks for the reply...that's been done, and I am running new code on the WESM and the Chassis provided by HP and no luck, I figure I give it a shot in the dark here, and see if anyone has ran into something similar
Trevor Commulynx
Regular Advisor

Re: WESM ZL Rebooting

what firmware are you running on the 5400zl?
NOV Noobie
Occasional Advisor

Re: WESM ZL Rebooting

been running K13.51 on the switch since January and WT01.23 on the WESM for about a week or so...
Trevor Commulynx
Regular Advisor

Re: WESM ZL Rebooting

Have you been running the same configs on both the switch and WESM through out this issue? if so post the config(s) of the switch and Wesm (- any sensitive details) as it seems this is the only common denominator as you have replaced the chasis and WEsm and still the issue.

Have you started with a blank config and slowly added configurations or does it happen if you leave a blank Wesm in the chasis?