Switches, Hubs, and Modems
cancel
Showing results for 
Search instead for 
Did you mean: 

Wake on LAN not working

PEI_1
Advisor

Wake on LAN not working

Hi,
I have setup a small networking connect 2 PCs to a Procurve 2610 to test out WoL.

I have turned on BIOS WOL for both PCs and make sure they can ping each other. I also checked the NIC, WOL Setting is set to Magic packet. SolarWinds WOL is installed on PC1.

I shutdown PC2, use Solarwinds WOL on PC1 to intiate WOL with the MAC and IP of PC2.

Unfortunately I do not see any WOL packets on my PC1 Wiresharks, PC2 did not wake at all.

There is no ARP entry for PC2 in the switch (After PC2 is being turned off).


Please help!!
2 REPLIES
PEI_1
Advisor

Re: Wake on LAN not working

Thanks, problem resolved. I could wake the PC. Just that Wiresharks does not show WOL packets
TamerHenien
Occasional Visitor

Re: Wake on LAN not working

How did you configure the Wake-on-LAN on the 2610