Switches, Hubs, and Modems
cancel
Showing results for 
Search instead for 
Did you mean: 

Web access denied

frederic_8
Occasional Visitor

Web access denied

On my Procurve 2910al with original firmware W.14.38 web access was working without particular config (Switch's ip setup).

Then, I have upgrade to last FW: W.14.49. Now the web access is no more working. Digging with ssh (which still working) I failing to find the parameter(s) to have again web access on my switch.
2 REPLIES
Natasha Samoylenko
Trusted Contributor

Re: Web access denied

It's strange behavior.
May be "web-management" command can help you?

You can also try to setup management interfaces with Management Interface Wizard:
setup mgmt-interfaces
frederic_8
Occasional Visitor

Re: Web access denied

setup mgmt-interfaces was the solution. web-management was disabled by upgrade of FW.