Email Subscription Notifications Suspended Temporarily
We are in the process of making navigation in the Servers and Operating Systems forums simpler and more direct. While doing this, we have to temporarily suspend email notifications for subscriptions. If you are subscribed to one or more discussion boards or blogs in the community, please check them daily to see new content. Notifications will be turned back on in a few days. We apologize for any inconvenience this may cause. Thanks, Warren_Admin
Switches, Hubs, and Modems
cancel
Showing results for 
Search instead for 
Did you mean: 

Web front no longer accessable (2650, 8.53sw)

Preston Gallwas
Valued Contributor

Web front no longer accessable (2650, 8.53sw)

Beginning yesturday, the web management fronts for one of our 250+ 2600 series switches became inaccessable. I've tried to disable/reenable the web piece in the config, then rebooted the switch -- tried again after the reboot and no beans.

Any ideas? :(
This is a stack commander of 7 or 8 switches, and we use the web piece mainly to monitor the LED status of ports when we need to 'flash' one.

THANKS!

Preston Gallwas
4 REPLIES
Les Ligetfalvy
Esteemed Contributor

Re: Web front no longer accessable (2650, 8.53sw)

Check the list of authorized IPs. Can it be accessed from any one of the authorized IPs? Check the browser proxy exclusion list.
Preston Gallwas
Valued Contributor

Re: Web front no longer accessable (2650, 8.53sw)

no proxy / exclusions configured, no authorized IP lists, just u/p
Preston Gallwas
Valued Contributor

Re: Web front no longer accessable (2650, 8.53sw)

:( the other 254 2600 series with 8.53 firmware are working...still no beans on this.
Preston Gallwas
Valued Contributor

Re: Web front no longer accessable (2650, 8.53sw)

downgraded fw, rebooted, upgraded fw, rebooted

works like a champ *sigh* weird stuff