Switches, Hubs, and Modems
cancel
Showing results for 
Search instead for 
Did you mean: 

Web-interface on stack of Procurves doesn't work.

Kirill E Ivanov
Occasional Visitor

Web-interface on stack of Procurves doesn't work.

I have a stack of five HP Procurve's. Commander Switch is 2524, members are three 2524 and one 2650. When i establish connection to the Web-interface, Java-applets, that are placed on the main page, doesn't display. After very longest downloading process, i see errors on page, that states "This java-applet cannot be displayed".

P.S. The last java virtual machine have installed. I use IE 6 and FireFox 1.5.
P.P.S. Command-line interface work properly, and the event log doen't contain any errors.
2 REPLIES
Matt Hobbs
Honored Contributor

Re: Web-interface on stack of Procurves doesn't work.

This will most likely be a combination of the firmware on your switches and the Java version in use on your client.

Update the switches to the latest firmware revisions, if you don't have any luck you may need to downgrade the java version on your PC. The release notes mention Sun Java 2 Runtime Environment: â Version 1.5.0.02, as the supported version.
Nico-Alexander Walter
Occasional Visitor

Re: Web-interface on stack of Procurves doesn't work.

I had the same Problem with Stacking,
because i can't change my JVM ,
i had disabled all Stacks.
I gave every Device it's own Management Ip, there was no more Problems with the Webinterfaces.