Switches, Hubs, and Modems
cancel
Showing results for 
Search instead for 
Did you mean: 

Web management on 2600, 2800 and 5300

SOLVED
Go to solution
Jonathan Axford
Trusted Contributor

Web management on 2600, 2800 and 5300

Hi guys,

I have been looking at the web management setups on our switches. It seems that our 2500 and 4100 switches prompt for the username and password before even opening up the web page, whereas the 5300,2600 and 2800 all open up the page and only prompt for authentication when a channge is tried.
Is there any way to get these to prompt for auth. before showing any information at all?

We have lots of inquisitive students here and i would rather they couldn't see any info at all!

Many thanks

Jonathan
Where there is a will there is a way...
2 REPLIES
Mohieddin Kharnoub
Honored Contributor
Solution

Re: Web management on 2600, 2800 and 5300

Hi

Setup the Operator password.

Good Luck !!!
Science for Everyone
Jonathan Axford
Trusted Contributor

Re: Web management on 2600, 2800 and 5300

Thanks very much, is working fine now.
:-)
Where there is a will there is a way...