Switches, Hubs, and Modems
cancel
Showing results for 
Search instead for 
Did you mean: 

Wireless Edge Service Module and Dynamic NAT

ENRICO BASSI_1
Occasional Contributor

Wireless Edge Service Module and Dynamic NAT

I'm trying to configure a Dynamic NAT on a WESM module installed on 5406zl.
The goal on this configuration is to nat the users in the wireless side (inside) of the wesm in order to browse Internet (outside), reachable trough a routing infrastructure.
The problem is that this configuration is not working.
I can't see any entry in the wesm ip nat translation table.
Any help would be appreciated.
Thanks in advance
Enrico