Switches, Hubs, and Modems
cancel
Showing results for 
Search instead for 
Did you mean: 

about procurve 5400 series crash data.

한승철
Occasional Contributor

about procurve 5400 series crash data.

when the procurve is happen some error or reboot, then the procurve will save crash data on the flash??

that`s meaning the procurve was reboot after, can i will get crash data??
1 REPLY
Shadow13
Respected Contributor

Re: about procurve 5400 series crash data.

You can use the below commands:
copy crash-data master tftp [*ENTER*]
copy crash-data tftp [*ENTER*]

The 1st command to copy the main crash data for the switch itself, the 2nd one is the crash data for a specific module

you can copy to differenet destinations other than TFTP