Email Subscription Notifications Suspended Temporarily
We are in the process of making navigation in the Servers and Operating Systems forums simpler and more direct. While doing this, we have to temporarily suspend email notifications for subscriptions. If you are subscribed to one or more discussion boards or blogs in the community, please check them daily to see new content. Notifications will be turned back on in a few days. We apologize for any inconvenience this may cause. Thanks, Warren_Admin
Switches, Hubs, and Modems
cancel
Showing results for 
Search instead for 
Did you mean: 

adding c3000 blade system to msa 1500cs via 2 fiber switches.

David Ichikawa
Occasional Contributor

adding c3000 blade system to msa 1500cs via 2 fiber switches.


Feb 29, 2008 22:35:45 GMT

We just purchased a c3000 blade system kit with 2 half height blades and a brocade 4GB 4/12 SAN switch interconnect module. We would like to attach it to our current msa1500 fiber switch (HP Storageworks 4/8 SAN Switch) which currently has one more port available in the zone.

I'm wondering how we need to configure the zoning/domain ID/subnet to add our c3000 to the existing SAN fabric. Do I need to create another zone? Set up ISL Trunking? Can the two fiber switches be in the same subnet? Is there any documentation to set this up?

Thanks in advance!
2 REPLIES
Evert Goor
Trusted Contributor

Re: adding c3000 blade system to msa 1500cs via 2 fiber switches.

You posted in the wrong forum. Better lookup something in the storage forum
David Ichikawa
Occasional Contributor

Re: adding c3000 blade system to msa 1500cs via 2 fiber switches.

yes, I did. But received no response. I'll try again or just call support.