Switches, Hubs, and Modems
cancel
Showing results for 
Search instead for 
Did you mean: 

alert on HP Procurve 4208vl power supply fail

SOLVED
Go to solution
Ervinck Kevin
Valued Contributor

alert on HP Procurve 4208vl power supply fail

Has anyone managed to monitor a power supply on a Procurve network switch like the 4208vl which has a dual power supply? We would like to be alerted when a power supply fails.
This switch doesn't seem to be included in the HP Procurve MIB files of September 2007.
4 REPLIES
Rob Buxton
Honored Contributor
Solution

Re: alert on HP Procurve 4208vl power supply fail

You might be better asking the question on one of the HP Network forums, or maybe Openview.

At this point it's the MIB you're missing and folks on those forums may have more of an idea of where the MIB might be found.
Richard Brodie_1
Honored Contributor

Re: alert on HP Procurve 4208vl power supply fail

hpicfChassis::hpicfSensorTable is probably a good place to start.
Ervinck Kevin
Valued Contributor

Re: alert on HP Procurve 4208vl power supply fail

Would you have the OID? I have no idea how I can quickly search for the naming you gave me.
Richard Brodie_1
Honored Contributor

Re: alert on HP Procurve 4208vl power supply fail

1.3.6.1.4.1.11.2.14.11.1.2.6 is the table. It's in hpicfChassis.mib

Here's an earlier post that has most of the relevant details:

http://forums11.itrc.hp.com/service/forums/questionanswer.do?threadId=1119977