Switches, Hubs, and Modems
Showing results for 
Search instead for 
Did you mean: 

blade c7000 with 6125g switches


blade c7000 with 6125g switches



We have two 6125g switches installed in C7000 bladesystem.


The two switches are plugged into adjacent (side-by-side) interconnect bays of the blade chassis, and as far as I know the internal 10-GE cross connect ports between those adjacent 6125G can be used for an IRF connection as well.


My question is, how can we enable/disable these internal cross-link ports and how can we configure IRF with these ports instead of the SFP+/IRF ports.


Thank You,