HPE Community
Switches, Hubs, and Modems
1752468 Members
6473 Online
108788 Solutions
New Discussion

c 3000 blade enclosure bl-460G1 server two CIsco MDS 9124e FIBER MODULE(MAZINENE)

 
FARRUKH NAVED SIDDIQI
Occasional Contributor

‎08-18-2009 03:53 AM

‎08-18-2009 03:53 AM

c 3000 blade enclosure bl-460G1 server two CIsco MDS 9124e FIBER MODULE(MAZINENE)

When I have installed two MDS 9124e Fiber chanel card in c3000 enclosure at Mazenine 3 and 4 . After installation both card not working with MSL-2024 AND MSA-2012 FIBER Channel card continue Amber light not green or link light open and als0 when i insert the IP address by on board administrator both card not accept these ip. UID light on AND power light normally work.But fiber patch cord not show the link light (transmit and receive)properly. What is the problem please send me some infromation about this problem.
0 Kudos
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.