Email Subscription Notifications Suspended Temporarily
We are in the process of making navigation in the Servers and Operating Systems forums simpler and more direct. While doing this, we have to temporarily suspend email notifications for subscriptions. If you are subscribed to one or more discussion boards or blogs in the community, please check them daily to see new content. Notifications will be turned back on in a few days. We apologize for any inconvenience this may cause. Thanks, Warren_Admin
Switches, Hubs, and Modems
cancel
Showing results for 
Search instead for 
Did you mean: 

disconnect after looking on event log

Stefan Spindler
Occasional Visitor

disconnect after looking on event log

Hi,

after i want to look on the Event Log in the menu on the CLI i get disconnted on my Switch HP Procurve 5406.

Also show log or log -r shows no entry, but i get not disconnected.

What is wrong ?
3 REPLIES
Michael_Breuer
Esteemed Contributor

Re: disconnect after looking on event log

Hello Stefan,

what firmware are you running? Can you attach config of the switch?

Cheers,

Michael
Ingentive Networks GmbH
Stefan Spindler
Occasional Visitor

Re: disconnect after looking on event log

Hi Michael,

Firmware ist K.13.60

I can acces the config. The Switch works fine, also. Only the log doesn´t work.

Greetings

Stefan
Stefan Spindler
Occasional Visitor

Re: disconnect after looking on event log

Hi,

it seems to be the Firmware K13.60 With the Firmware K14.41 on the second flash we have no problems.