Switches, Hubs, and Modems
Showing results for 
Search instead for 
Did you mean: 

dl7201 and shaping

Occasional Advisor

dl7201 and shaping

is it possible to shape traffic on eth0/1.111 (vlan 111) interface? I played with bandwidth option but whith no visible changes to traffic flow.
Olaf Borowski
Respected Contributor

Re: dl7201 and shaping

The bandwidth command is only used for calculations used by OSPF and QoS etc.
What you would want is the "traffic-shape" command. This is only supported on the physical interface, not VLAN sub-interface.
int eth 0/2
traffic-shape rate xxxx

This command is not available under:
eth 0/2.111