Switches, Hubs, and Modems
cancel
Showing results for 
Search instead for 
Did you mean: 

enable telnet via snmp?

Raoul Paquin
Occasional Visitor

enable telnet via snmp?

In a great security purge, telnet was disabled prior to checking if ip ssh was supported on the code versions of hp procurves involved, thereby disconnecting remote admin from the switches.

So is there a way that knowing the private snmp string that telnet can be re-enabled so that code updates can be applied?

before someone says web interface, they turned off those also. both http and https.

any pointers welcome