Switches, Hubs, and Modems
cancel
Showing results for 
Search instead for 
Did you mean: 

hp 2610

notofnow
Occasional Visitor

hp 2610

can you do cost based routing or rip on a regular hp switch
1 REPLY
Mark Wibaux
Trusted Contributor

Re: hp 2610

These model of switches only have basic layer3 routing support.
From the quickspec
Basic IP routing: enables automatic routing to the connected VLANs and up to 16 static routes--including one default route--in IP networks

--------------

You can only have 1 static route to a subnet (all static routes are created automatically with a metric of 1). If you try to add another route to the same subnet it will overwrite the current entry with the new one.

Pull down a copy of the "Advanced Traffic Management Guide for the ProCurve Series 2610 Series" from here
http://www.hp.com/rnd/support/manuals/2610.htm
for full details on routing in this switch