hp 8206zl: swap j8702a module witch j8705a

[Andrea Barghigiani]

In my 8206zl switch i have installed n.3 j8702a modules and a j8705a module. I tried to change two j8702a modules, from slot A to slot C and viceversa, without problems. But if i exchange j8705a with j8702a (from slot A to slot B and viceversa), the modules fail the self test and relative leds blink orange. Should I need to reinitializa something?

thank you
e.frediani

[EckerA]

ok..
the switch is only hotswappeble if you change a modul with the same modul or into a free slot where no module has been since the last reload.
if you change a module against another module, as you did, a switchreload is needed..

hth
alex