hp2626

[vakaris]

hi
i have hp2626 and MS IAS
when i set port-access eap-radius chap-radius
fine, working,
but i i set : port-access eap-radius
i have :
RADIUS, Access Request and RADIUS, Access Challenge but no more ..

firmware version #H.08.98

some lines from my config:
ip default-gateway 172.16.0.254
snmp-server community "public" Unrestricted
vlan 1
name "DEFAULT_VLAN"
no ip address
tagged 1-26
exit
vlan 43
name "vlan43"
untagged 3
ip address 172.16.0.70 255.255.255.0
tagged 1-2,4-26
exit
vlan 3
name "vlan3"
untagged 2
tagged 1,3-26
exit
aaa authentication port-access eap-radius
radius-server host 172.16.2.3 key hp
primary-vlan 43
aaa port-access authenticator 5-20
aaa port-access authenticator 5 unauth-vid 3
aaa port-access authenticator 6 unauth-vid 3
aaa port-access authenticator 7 unauth-vid 3
aaa port-access authenticator 8 unauth-vid 3
aaa port-access authenticator 9 unauth-vid 3
aaa port-access authenticator 10 unauth-vid 3
aaa port-access authenticator 11 unauth-vid 3
aaa port-access authenticator 12 unauth-vid 3
aaa port-access authenticator 13 unauth-vid 3
aaa port-access authenticator 14 unauth-vid 3
aaa port-access authenticator 15 unauth-vid 3
aaa port-access authenticator 16 unauth-vid 3
aaa port-access authenticator 17 unauth-vid 3
aaa port-access authenticator 18 unauth-vid 3
aaa port-access authenticator 19 unauth-vid 3
aaa port-access authenticator 20 unauth-vid 3
aaa port-access authenticator active

sorry for my english..

[vakaris]

;) i found solution .. just upgrade firmware to current.