loopback interface

[benben_3]

Hi,

Would I be correct in thinking that the procurve 5300xl lacks loopback interface functionality?

On another note, is it possible to configure syslog functionality with a specific source IP?

Thanks in advanced.

Ben

[Matt Hobbs]

Yep, 5300 does not have a loopback interface. The newer 5400/8200 products do.

syslog I believe will attach itself to the first VLAN that comes online. Unfortunately you cannot configure this.

You can configure snmp trap-source at least though.

[cenk sasmaztin]

hi benben
answer 1
yes 5300 switch lack loopback interface functionality.

answer 2
yes can you make specific ip on systemlog server for above command

(config)#logging

good luck..

[cenk sasmaztin]

and install system log server program on your pc
below link include tftp server,tftp client,dhcp server ,system log server application program

http://pagesperso-orange.fr/philippe.jounin/tftpd32_news.html

good luck