mac-auth via radius and ip-phones

[Marcus J]

Hi,

in our setup we want to be able to run both ip-phones and computers on the same ethernet port.

so a typical port to a phone have vlan 1(pc-vlan) untagged, vlan 15(ip-phone vlan) tagged.
this setup have always worked!

But since we added mac-auth via radius the phones behaves strangely, it sometimes connect and sometimes not.
We are using Procurve 2650-pwr h10.50 software.

the pc's mac-addresses are added to the group vlan1 so vlan1 is being untagged to the computers.
also the phones are added to group vlan1 because if the phone authenticates with it's mac-address i would still like vlan1 to remain utagged so the pc recieves the right vlan.
vlan 15 is statically tagged on the switchport connecting the phones.

Is this the recommended setup?

[cenk sasmaztin]

hi Marcus

some ip phone in tandem with pc authentication issue resolve H_10_69 frimware
please update your switch last frimware

[cenk sasmaztin · Accepted solution]

last update
H_10_74
http://www.hp.com/rnd/software/j49001074.htm

[Marcus J]

Thanks, i will try upgrading later this evening.