Switches, Hubs, and Modems
cancel
Showing results for 
Search instead for 
Did you mean: 

mac-auth via radius and ip-phones

SOLVED
Go to solution
Marcus J
Frequent Advisor

mac-auth via radius and ip-phones

Hi,

in our setup we want to be able to run both ip-phones and computers on the same ethernet port.

so a typical port to a phone have vlan 1(pc-vlan) untagged, vlan 15(ip-phone vlan) tagged.
this setup have always worked!

But since we added mac-auth via radius the phones behaves strangely, it sometimes connect and sometimes not.
We are using Procurve 2650-pwr h10.50 software.

the pc's mac-addresses are added to the group vlan1 so vlan1 is being untagged to the computers.
also the phones are added to group vlan1 because if the phone authenticates with it's mac-address i would still like vlan1 to remain utagged so the pc recieves the right vlan.
vlan 15 is statically tagged on the switchport connecting the phones.

Is this the recommended setup?
3 REPLIES
cenk sasmaztin
Honored Contributor

Re: mac-auth via radius and ip-phones

hi Marcus

some ip phone in tandem with pc authentication issue resolve H_10_69 frimware
please update your switch last frimware

cenk

cenk sasmaztin
Honored Contributor
Solution

Re: mac-auth via radius and ip-phones

Marcus J
Frequent Advisor

Re: mac-auth via radius and ip-phones

Thanks, i will try upgrading later this evening.